USED Music Man Music Man / Edward Van Halen sigunature Tranc Red [20]

Made in 1991, the predecessor model of AXIS "EVH Signature" was produced during Van Halen's endorsement contract with Music Man.
Beautiful body with asymmetrical neck grip for great playability.
The maple neck and basswood body are lightweight, yet the wood has excellent resonance, and the sound is full and well-defined.

* After it arrived at our store, it has undergone cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, burr removal, mortise and tenon adjustment, and electrical repair.
The neck is slightly threadbare, and has been adjusted by fret adjustment.

The arm and back panel are missing, and the strap pin has been replaced.
There are some parts that have some spots and minor rusting.
There are many scratches and small flaws on the top clear layer of the body, and there are many small dents with paint chips and wood dents around the head, body back, and near the strap pins.

Item rank: B+ (Good)

Year of manufacture: 1991
Truss rod: There is enough room.
Fret: 60-70%.
Accessories: Gig bag/not genuine
Country of Origin ： USA
Weight ： 3.37kg
Serial ： 80714

Truss Rod: No problem, confirmed up to 60 degrees left and right (slight torsion)
Fret height is sufficient.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|41.1mm
Neck thickness(near 1st fret)|20.3mm
Neck thickness (near 12th fret)|23.1mm
SCALE|648mm (25.5")
RADIUS|254mm (10")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, deburring, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
There is a note that the rod has been checked up to 60 degrees to the left and right, and there is no problem (slightly twisted).

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
41.1mm

Neck Thickness (near 1st fret)
20.3mm

Neck Thickness (near 12th fret)
23.1mm

Scale
648mm (25.5")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, burr removal, matching, electrical repair