USED Gibson Montana Gibson / The 59 J-45 [03]

1959 J-45 built to store order.
It has a citrus spruce top, mahogany sides and back, mahogany neck, rosewood fretboard and bridge, pointed large pickguard, triple Cruson deluxe pegs, and gloss finish, but it also has a CAD-data reproduction of the original 1959 neck. The neck shape is reproduced from CAD data of the original 1959 neck, and the bridge has a large stud screw with a large head, which is a characteristic of the '59 model.

* After arrival at our store, it has been cleaned, string replaced, rod adjusted, string height adjusted, and rubbed together, so it is in good playing condition.

There is a slight paint burn on the neck around the 1st and 2nd floor due to the stand.
There are some minor scratches and dents, but there are no noticeable scratches or dents with paint chips, and it is in good condition.

Item rank: B+ (Good)

Year of manufacture: 2015
Truss rod: There is room to spare
Fret: 60-70%.
Accessories: Hard Case / Certificate of Authenticity
Country of Origin ： USA
Weight ： 1.84kg
Serial ： 12845016

Truss Rod: No problem, confirmed to be 60 degrees left and right
Fret height is sufficient.
String height(bass string side)|2.5mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|44.2mm
Neck thickness(near 1st fret)|22.8mm
Neck thickness(near 12th fret)|-
SCALE|624mm (24.56")
RADIUS|254mm (10")
Strings used for setup|Galli Strings / .012-.054 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, string height adjustment, and rubbing

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.5mm above 12th fret

String height (treble string side)
2.0mm above 12th fret

Nut Width
44.2mm

Neck Thickness (near 1st fret)
22.8mm

Neck Thickness (near 12th fret)
-Neck Thickness (near 12th fret)

Scale
624mm (24.56")

RADIUS
254mm (10")

Strings for Setup
Galli Strings / .012-.054 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, string height adjustment, and alignment