USED GIBSON USA / Explorer Pearl White 1983 [03]

1983 Gibson USA/Explorer Pearl White is now in stock!

Alder body with 1 piece maple neck and rosewood fingerboard.
The neck shape is C-shape, which gives the impression of being relatively thin.

The ABR-1 bridge with "Made in Germany" stamped on it and the pegs with Gibson's stamp are also original parts.
Pearl White" color with fine pearl grains shines through, and gold parts with tarnish and greenish-blue color are also original.

Two "Engraved Numbered PAF" pickups with Patent No. 2, 737, and 842 are equipped.
You can see the traces of touching solder. The DC resistance value is about 7.0k for the front PU and about 7.3k for the rear PU.
The sound is easy to handle even today because it has a moderate power.
The pot date is difficult to determine as there are many areas covered with solder, but it is believed to be original.

FrontVolume -R137xxxxxx

BridgeVolume -Rxxxxxxxxxxx

MasterTone -1378xxx

The condition of this guitar was made in 1983, and there are scratches, dents, paint cracks, peeling paint, and faded color throughout.
There are some sticker marks on the back of the head.
The frets have been worn and are low, but there is no noticeable sound clogging.

The fretboard has been worn and the frets are low, but there is no noticeable sound clogging!
This is a rare '83 Explorer, so please consider this an opportunity to own one!

* Please note that this item is not for sale at any other Ishibashi Gakki stores or locations.
Please contact the Ishibashi Gakki Ochanomizu flagship store if you have any questions.
Truss Rod: Tightening direction has room / Loosening direction has room
Neck Condition: No problem
Fret: 50% remaining
Case: Original hard case
Accessories: Black pick guard
Serial number: 83423503
Weight: 3.66 kg

Item rank: B+: Some scratches, but no problem in normal use

Serial Number: 83423503
Year of manufacture: 1983
Case: Hard case
Weight: 3.66 kg
Truss Rod: Tightened to 90 degrees
Fret Residuals: Still in good shape for cutting, but the frets are low.
String Height Low String Side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.2mm
Neck thickness near 1st fret: 20.2mm
Neck thickness near 12th fret: 24.1mm
SCALE: 628mm (24.75")
RADIUS: 254mm (10")
Strings in setup: .010-.046 set
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
83423503

Year of manufacture
1983

Case
Hard Case

Weight
3.66kg

Truss Rod
Up to 90° on the tightening side

Frets Remaining
Note: Fretboard can still withstand cutting, but the frets are low.

String Height Low String Side
2.0mm above the 12th fret

High string side
1.5mm above the 12th fret

Nut width
43.2mm

Neck thickness near 1st fret
20.2mm

Neck thickness near 12th fret
24.1mm

Scale
628mm (24.75")

RADIUS
254mm (10")

Strings for Setup
.010-.046 set

Repair and maintenance parts
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing