USED FENDER CUSTOM SHOP / 1960 Stratocaster Closet Classic Daphne Blue [03]

Fender Custom Shop/1960 Stratocaster Closet Classic Daphne Blue made in 2000 is now in stock!

Alder body, maple neck, and slabbed rosewood fingerboard are the classic specs of the 1960s Stratocaster.
The maple neck has a distinctive bird's eye pattern.
The neck shape is a thin C-shape, the fingerboard radius is 7.25R, and 21 vintage size frets are used.
The fretboard radius is 7.25R, and 21 vintage size frets are installed.

Three original 60's single coil PUs are installed.
It has a fat sound with emphasis on the mid and low frequencies, which is typical of the 60's Strat sound.
Controls are Master Volume, Tone 1 (Neck Pickup), Tone 2 (Middle Pickup), and 3-way switch.

The condition of the guitar shows the original "Closet Classic" finish, which has been applied to the guitar, and the parts are dull, but there are also some weather checks, rust, scratches, dents, and fading due to color burn.
There is also some darkening at the neck neck.
The guitar is in good condition with no playability issues.

This is a Custom Shop model with the 1960 specs reproduced well!
Please take advantage of this opportunity!
Truss rod: 90 degrees on the tightening side.
Neck condition: No problem
Fret: 70% full
Case: Genuine hard case
Accessories: Certificate, arm, bridge cover, 5-way lever switch, etc.
Serial number: R6998
Weight: 3.585kg

* Due to the nature of this product, we will refrain from showing or moving it to other stores within Ishibashi Gakki. Please understand this in advance.
Please contact the Ochanomizu Main Store for further information.

Item Rank: B: Fairly scratched and used, but no problem in normal use.

Serial Number: R6998
Case: Hard Case
Weight: 3.59kg
Truss Rod: 90° on the tightening side
Fretboard: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.7mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 19.7mm
Neck thickness near 12th fret: 22.9mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and deburring

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
R6998

Case
Hard case

Weight
3.59kg

Truss Rod
Checked to 90° on the tightening side

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.7mm above the 12th fret

Nut width
42.0mm

Neck thickness near 1st fret
19.7mm

Neck thickness near 12th fret
22.9mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and deburring