USED FENDER MADE IN JAPAN / Traditional II 70s Stratocaster [03]

FENDER MADE IN JAPAN Traditional II 70s Stratocaster in used condition.
The frets have been worn out.
There are some minor scratches on the overall body and some large scratches on the lower part of the body.

Serial Number|JD20013479
Year of manufacture
Country of manufacture
Case|Non-genuine soft case (zipper is partially broken, and a part of the shoulder strap is missing, so it was installed with a substitute)
Attachment: Arm
Weight|3.65kg
Truss rod: No problem, confirmed up to 60 degrees to the left and right
Fretboard: No problem, enough fretboard height.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|40.2mm
Neck thickness(near 1st fret)|23.4mm
Neck thickness (near 12th fret)|23.8mm
SCALE|648mm (25.5")
RADIUS|241mm (9.5")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Modified parts|-
Repair and maintenance parts|Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment
Other|-
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: JD20013479
Country of manufacture: Japan
Case: Soft Case
Accessories: Rod
Weight: 3.65kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 40.2mm
Neck thickness near 1st fret: 23.4mm
Neck thickness near 12th fret: 23.8mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
JD20013479

Country of manufacture
Japan

Case
Soft case

Accessories
Rod

Weight
3.65kg

Truss Rod
No problem, rod checked up to 60 degrees left and right

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
40.2mm

Neck thickness near 1st fret
23.4mm

Neck thickness near 12th fret
23.8mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment