USED FENDER MADE IN JAPAN / Made in Japan Char Mustang Olympic White [03]

FENDER MADE IN JAPAN Made in Japan Char Mustang in used condition.
There are no noticeable scratches, stains, etc., and there are few signs of use.
This item has been cleaned, maintained, and set up by our repair department.
We also offer a 1-year warranty to ensure that you can use the instrument for a long time after purchase.

Item rank: A: Beautiful

Serial Number: JD23014826
Year of manufacture: 2023
Country of manufacture: Japan
Case: Soft case
Accessories: Arm, Wrench
Weight: 3.09kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.3mm
Neck thickness near 1st fret: 21.3mm
Neck thickness near 12th fret: 24.0mm
SCALE: 610mm (24")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product rank
A: Beautiful

12 months old

Serial No.
JD23014826

Year of manufacture
2023

Country of manufacture
Japan

Case
Soft case

Accessories
Arm, Wrench

Weight
3.09kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Leftover frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.3mm

Neck thickness near 1st fret
21.3mm

Neck thickness near 12th fret
24.0mm

Scale
610mm (24")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment