USED Fender / 1979 Stratocaster Black [05]

This one rocks! Large head black maple, black pickguard, black PU cover Stratocaster in stock!

Large head, modern logo, two string guides, bullet truss rod for neck adjustment from the head side without removing the neck, three-point neck joint plate, and micro-tilt internal neck joint that allows easy adjustment of the neck insertion angle with an Allen wrench, This 1979 Fender Stratocaster is both visually and functionally distinctive.

This large head Stratocaster was used by many musicians during the heyday of hard rock music, and has a rockier sound than the Stratocasters of the 1960s.

The PU of this guitar has 3 gray bobbins, POT, and condenser probably from that time.

At the time of purchase, there was some string drop at the high fret of the first string, which has been adjusted by shimming the side of the neck pocket.
Also, there was a crack in the paint on the side of the fingerboard that caused pain to the thumb when sliding, so it was adjusted by adding clear paint. We did not touch up or over lacquer to ensure playability.

The sound was not well balanced.
Currently, the strings are set up at the standard height (2.0mm on the 6th string and 1.5mm on the 1st string at the 12th fret).

The price is set lower than the market price because the instrument shows a lot of signs of use.
The playability has been ensured, so this is a recommended item for those who want to play hard!

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: S917734
Year of manufacture: 1979
Country of manufacture: USA
Case: Hard Case
Accessories: Arm
Weight: 3.85kg
Truss Rod: No room to loosen the rod.
Fret Level: Fret is low.
Low string height: 2.0mm above the 12th fret
High string height: 1.5mm above the 12th fret
Nut width: 40.5 mm
Neck thickness near 1st fret: 22.8 mm
Neck thickness near 12th fret: 24.1 mm
SCALE: 648 mm (25.5")
RADIUS: 184 mm (7.25")
Strings in setup: .010-.046 set
Repair and Maintenance: Neck pocket shim adjustment, neck side paint sanding, small amount of fret adjustment, Volume Pot Date: R137 78XX 250KΩ A
Front Tone Pot Date: R137 7XXX 250KΩ A
Center Tone Pot Date: xxx7901 250KΩ A
Capacitor: DILECTRON .05M 100v ceramic

* The truss rod, fret length, and string height are measured by our staff at the time of setup and may vary depending on the climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
S917734

Year of manufacture
1979

Country of manufacture
U.S.A.

Case
Hard Case

Accessories
Arm

Weight
3.85kg

Truss Rod
No room to loosen the rod No problem with the neck at present

Fret remainder
Low frets

String Height Low String Side
2.0mm above 12th fret

High string side
1.5mm above the 12th fret

Nut Width
40.5 mm

Neck Thickness near 1st Fret
22.8 mm

Neck Thickness near 12th Fret
24.1 mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
.010-.046 set

Repair and maintenance parts
Neck pocket shim adjustment, neck side paint sanding, minor fret adjustment, volume pot date
R137 78XX 250KΩ A

Front Tone Pot Date
R137 7XXX 250KΩ A

Center Tone Pot Date
xxx7901 250KΩ A

Capacitor
DILECTRON .05M 100v Ceramic