USED FENDER CUSTOM SHOP / Limited Edition 1959 Stratocaster NOS 3A Birdseye Maple Neck Sea Foam Green [05]

2024 Limited Edition Model! Beautiful used 1959 Stratocaster is now in stock!

This is a limited edition model of the 2024 Fender Custom Shop Fall event, which was re-ordered by the Ishibashi Gakki Shibuya store at the time.

It has a 2-piece Alder body and "AAA Birdseye 1-Piece Maple" neck. The neck shape is a slightly thicker "Large "C", and the fingerboard radius and frets are 9.5" Radius & Narrow Tall (6105) with 21 frets.

Hand-Wound Fat50s Single-Coil Strat pickups are installed.
Hand-Wound pickups are one rank higher pickups.
Controls are "Strat Vintage Mod Wiring#2". Tone also works on the bridge pickup.
Body color is "Sea Foam Green" NOS spec with gold hardware. The neck plate is engraved "LIMITED EDITION", which is a special limited edition model.

This is a very clean and beautiful model with little signs of use.
Please take advantage of this opportunity.

Product Specifications
Body: 2-Piece Alder
Neck | AAA Birdseye 1-Piece Maple
Neck Back-Shape | Large "C"
Radius | 9.5"
Frets | 21, Narrow Tall (6105)
Pickup | Custom Shop Hand-Wound Fat50s Single-Coil Strat
Control | Strat Vintage Mod Wiring #2
Switch | 5-Way
Bridge | Custom Shop Vintage Style
Tuners | Vintage w/Fender Logo
Nut | Bone
StringGuide | American Vintage 59-64

Item Rank: B+: Some scratches, but no problem for normal use.

Serial Number: CZ581405
Country of manufacture: USA
Case: Original Hard Case
Accessories: wrench, bridge cover, manual, certificate, strap
Weight: 3.48kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right, no problem.
Fretboard: No problem, sufficient fretboard height
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.2mm
Neck thickness near 1st fret: 22.1mm
Neck thickness near 12th fret: 25.1mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.