USED Tom Anderson / Classic Bora Bora Blue Alder [05]

Classic Bora Bora Blue, Tom Anderson's signature model, is in stock!

It was made in 2000 during the 4-point bolt period, but it is a relatively clean one with few scratches for a piece from that time!
Anderson Guitar Works was founded in the mid-1980s as a garage brand in California, and Tom's guitars have often been described as "the best guitars on the planet.

Only the finest and most beautiful woods are selected from the lumber mills. The process integrates traditional handcrafting and state-of-the-art technology by skilled craftsmen to create bodies and necks that are especially precise and comfortable.

The company is also renowned for offering a wide range of pickups designed to deliver optimum tone, and for pioneering the use of UV paint curing to dramatically improve the sound potential of its instruments.

The company's philosophy of "all the right parts, assembled just right" was truly reflected in the playability and sound of its instruments. This means that when you pick up a Tom Anderson, you can be assured of consistent quality and equally outstanding performance, no matter which model you choose.

The brand is famous for producing very few pieces per year. The spirit of the company, which insists on handmade products, and never breaks with the system to assemble and ship each piece with assured precision, is still alive and well today. It is said that only about 600 pieces are produced per year, and only about 100 of them enter Japan. Considering this, the fact that so many big-name musicians own these instruments in spite of the very small number produced means that a very high percentage of them are in the hands of professionals, and once again we can understand the greatness of this brand.

SD1R SD1 H2+ pickups are installed. This is a standard large pole piece type pickup, which produces a warm and warm sound whether it is a single or humbucker pickup.

This guitar has an alder body, which is a rare specification for Classic Bora Bora Blue.
It is a good match for the above pickups and produces a softer sound than the Ash body model.

The Contorol has a 5-way blade switch to switch between pickups, a mini-switch for coil split, and a Tone knob that can be pulled up to add the sound of the rear pickup when a front or front + middle mix tone is selected.

The Buzz Phaeton design allows for a higher level of tuning.

There are some scratches and signs of use, but the neck, frets, truss rod, etc. are in perfect playing condition.
* There is a scratch on the edge of the fingerboard near the 10th fret on the 1st string side, but it does not affect fingering or sound clogging.

The guitar has been precision-fretted at our repair center, so it is in very playable condition.

This is a brand that is likely to rise in price in the future.
This is your best chance to own a guitar of your dream brand, so don't miss it!

Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: 07?06?00P
Year of manufacture: 2000
Country of manufacture: USA
Case: Hard Case
Accessories: Arm
Weight: 3.40kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 1 11/16-inch (42.86mm)
Neck thickness near 1st fret: 0.810
Neck thickness near 12th fret: 0.870
SCALE: 25 1/2"
RADIUS: 12-14
Strings in setup: .010-.046 Elixir strings
Repair/Maintenance: Cleaning, rod adjustment, octave adjustment, string height adjustment, and rubbing

specs: .010-.046, .010-.046, .010-.046

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
07?06?00P

Year of manufacture
2000

Country of manufacture
USA

Case
Hard Case

Accessories
Arm

Weight
3.40kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut Width
1 11/16-inch (42.86mm)

Neck thickness near 1st fret
0.810

Neck thickness near 12th fret
0.870

Scale
25 1/2"

RADIUS
12-14

Strings for Setup
.010-.046 Elixir strings

Repair and maintenance
Cleaning, Rod adjustment, Octave adjustment, String height adjustment, Rubbing