USED FENDER USA / American Original 50s Stratocaster Aztec Gold [06]

The American Original '50s Stratocaster offers the legendary styling and tone of models of the era, plus modern playability and switching options.

The potting (waxed) Pure Vintage '59 single-coil Stratocaster pickups on this model are faithfully reproduced to period specifications, from the Formvar coated coil wires to the cross covered output wires, fiber bobbin, and Alnico 5 The pickups are faithfully reproduced to period specifications, from the Formvar coated coil wires to the cross covered output wires, fiber bobbins, and Alnico 5 magnets.

The thicker Soft V neck shape is perfect for chord playing, and the 9.5" R fingerboard provides modern playability. Vintage-style hardware including vintage tall frets, original model body radius, 6-point synchronized tremolo bridge, vintage-style hard case, and lacquer finish for superb tone and exquisite ageing. The vintage-style hardware includes a tremolo bridge, vintage-style hard case, and a lacquer finish that gives it an exquisite tone and age-defying appearance.
There are many scratches on the pickguard, dings and paint chips on the head, and dings and paint chips on the outer surface of the body.
In addition, there is a crack on the back panel, the PU cover has been scraped, and the strap pin has been replaced.
The guitar has been cleaned and adjusted after arrival, and the frets have been adjusted for fret rubbing, so it can be used without any playing problems.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: V1853289
Country of manufacture: USA
Case: Hard Case
Accessories: Arm
Weight: 3.53kg
Truss Rod: Noted, rod is checked to 60 degrees to the left and right, no problem (not much left)
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.3mm
Neck thickness near 1st fret: 23.5mm
Neck thickness near 12th fret: 25.4mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in Setup: .009-.042 set
Modification: Strap pins
Repair and Maintenance: Fret adjustment, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
V1853289

Country of manufacture
U.S.A.

Case
Hard Case

Accessories
Arm

Weight
3.53kg

Truss Rod
No problem (not much left), as confirmed up to 60 degrees to the left and right of the rod with caution

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above the 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.3mm

Neck thickness near 1st fret
23.5mm

Neck thickness near 12th fret
25.4mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
.009-.042 set

Modification point
Strap pin

Repair and Maintenance
Fret adjustment, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment