USED FENDER MEXICO / Classic Player Baja Telecaster Black [06]

FENDER MEXICO Classic Player Baja Telecaster Black Pre-Owned is in stock now!
Made in Mexico in 2012.
Baja Telecaster designed by master builder Chris Fleming.
Ash body with maple neck and fingerboard.
Custom Shop "Twisted" Single-Coil Tele on the front and Vintage-Style Single-Coil Tele on the rear.
The pickup selector is a 4-way, which allows the user to choose between front and rear series wiring for a powerful sound in addition to the normal layout. An S-1 switch allows the pickups to be phased out when mixed. The neck plate is engraved with "Fender Custom Shop Designed.
There is a small paint crack at the neck joint.
There are some other minor scratches, dents, and dull metal parts, but the guitar is in good condition for a used instrument.
It has been cleaned and adjusted after arrival and has no playing problems.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: MX12315873
Country of manufacture: Mexico
Case: Soft case
Weight: 3.92kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.76mm
Neck thickness near 1st fret: 22.98mm
Neck thickness near 12th fret: 24.91mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number MX12315873

Country of manufactureMexico

CaseSoft case

Weight3.92kg

No truss rod problem.

Fret remainder no problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.76mm

Neck thickness near 1st fret 22.98mm

Neck thickness near 12th fret: 24.91mm

SCALE 648mm (25.5")

RADIUS241mm (9.5")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment