USED FENDER MADE IN JAPAN / Traditional II 70s Telecaster Custom BLK [06]

FENDER MADE IN JAPAN Traditional II 70s Telecaster Custom BLK Used is in stock now!
Made in Japan in 2025.
Ash body with maple neck and fingerboard.
Fender Wide-Range Humbucking pickups on the front and Vintage-Style Single-Coil Tele on the rear.
The bridge is a 3-Saddle Vintage-Style Tele with Slotted Steel Saddles.

There are some minor scratches, dents, and dull metal parts, but it is in clean condition for a used instrument.
The instrument has been cleaned and adjusted after arrival and is in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: JD25008885
Year of manufacture: 2025
Country of manufacture: Japan
Case: Soft case
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fretboard: No problem, as good as new
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.7mm
Neck thickness near 1st fret: 21.54mm
Neck thickness near 12th fret: 22.9mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* This is a used item and there are scratches, dents, etc. that are difficult to see in the photos or other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number JD25008885

Year of manufacture 2025

Country of manufacture Japan

CaseSoft case

No truss rod problem.

No fret remainder problem, same condition as new.

String height 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 41.7mm

Neck thickness near 1st fret 21.54mm

Neck thickness 22.9mm near 12th fret

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment