跳至产品信息
1 / 16

USED FENDER JAPAN / MG69 OCR [06]

Serial Number : MIJU002936

[SN MIJU002936] USED FENDER JAPAN / MG69 OCR [06]

Item Code: 06-2800005035322
Condition: USED
Store: [06] shinjuku

常规价格 ¥124,800 JPY
常规价格 促销价 ¥124,800 JPY
销售额 售罄
结账时计算的运费
If you would like to make a bank transfer, please give us an e-mail with name of your request item.
For customers residing in Japan
FENDER JAPAN MG69 OCR Used is in stock now!
Made in Japan from 2010 to 2012.
Lightweight and compact body with contoured finish, '69 spec mustang.
Basswood body with maple neck and rose fingerboard.
Two Japanese-made MG-VINTAGE pickups are installed.
Tremolo arm is missing.
There are some other minor scratches, dents, and dull metal parts, but it is in clean condition for a used item.
It has been cleaned and adjusted after arrival, and there are no performance problems.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: MIJU002936
Year of manufacture: 2010-2012
Country of manufacture: Japan
Case: Soft case
Weight: 3.11kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 40.1mm
Neck thickness near 1st fret: 21.4mm
Neck thickness near 12th fret: 23.9mm
SCALE: 610mm (24")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
FENDER JAPAN MG69 OCR 中古入荷いたしました!
2010年〜2012年日本製。
軽量・コンパクトなボディにコンター加工を施した69年仕様のムスタング。
バスウッドボディにメイプルネック、ローズ指板の仕様。
ピックアップは日本製のMG-VINTAGEを2基搭載。
トレモロアームは欠品しています。
その他細かい擦り傷や打痕、金属パーツのくすみなどはございますが中古商品としてはきれいな状態です。
入荷後クリーニング、全体調整済みで演奏上問題ありません。
商品ランク: B+:多少傷はあるが通常使用する用途において問題なし

シリアルナンバー: MIJU002936
製造年: 2010-2012
製造国: 日本
ケース: ソフトケース
重量: 3.11kg
トラスロッド: 問題なしロッド左右60度まで確認済みにて問題なし
フレット残り: 問題なし充分なフレット高さあり
弦高低音弦側: 12フレット上 2.0mm
弦高高音弦側: 12フレット上 1.5mm
ナット幅: 40.1mm
ネック厚1フレット付近: 21.4mm
ネック厚12フレット付近: 23.9mm
スケール: 610mm (24")
RADIUS: 184mm (7.25")
セットアップ時の弦: ERNIE BALL 2221 / .010-.046 set
リペア・メンテナンス箇所: クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・フレットすり合わせ

* 中古品につき、傷・打痕等、写真に写りにくい部分や記載以外の傷があります。予めご了承くださいませ。

* トラスロッド、フレット残り、弦高等の記載がある場合は当社スタッフがセットアップ時に計測したものであり、気候、湿度等、環境の違いによる影響等で、変化が起こります。
数値は購入時の参考としてご利用いただく事を想定しており、お手元に届いた際に同数値である事をお約束するものではございません。

* こちらの商品は現物1点限りを、店頭展示を含め複数のモールに同時掲載しております。売却に伴う商品情報の削除は迅速を心掛けておりますが、必ずしもリアルタイムではございません。
ご注文後に万一売り切れとなっておりました際は、誠に申し訳ございませんがご容赦くださいませ。
查看完整详细信息

注意事项

名称中带有“USED”的商品为二手商品,如图所示,二手乐器会有使用过的痕迹。所有商品都经过我们商店工作人员的测试,我们在发货前对每件商品进行了一次测试,以确保它们的正常使用状态。

在ISHIBASHI MUSIC 上出售的所有商品均为我们各个实体店的现货,因此会出现在店铺售完网页没有及时删除的情况。在这种情况下,我们将取消订单并退还收到的所有付款。

买家需承担可能产生的任何及所有关税和海关费用。这些费用不包含在商品价格或运费中。

请在购买之前确认好关税相关事宜后再下单。

我们无法在发货时更改产品价格,也不能将您购买的产品称为礼物。

我们的工作日是周一至周五,周末无法发货和运输。

PACKING BOX SIZES

ABOUT US

石桥音乐株式会社是日本最大的乐器零售连锁店之一。该公司是全球公认的优质二手和古董乐器的可靠销售商。

石桥乐器不仅出售全新,也出售二手乐器及古董乐器。石桥乐器在日本各地拥有超过 11 家门店,包括东京、横滨、千叶、名古屋、大阪和福冈。

所有的商品均由日本各地的石桥乐器发往世界各地,通常运输时间大约需要 7 到 10 天。
我们的营业时间为上午 10:00 至下午 6:00(东京时区)

Sale

1 / 4