USED Fender USA / American Vintage '57 Stratocaster Surf Green [1989/3.56kg]

This is a Fender USA American Vintage Series 57 Stratocaster.

This Stratocaster has a 1957 style alder body, one-piece maple neck, 8-point pickguard, and was made in 1989 when the head shape was what is called "guppy head" period. Polyester paint, 3 Vintage Single Coil PUs, Vol/Front Tone/Center Tone, 3-way selector.

This is a recommended one for players who are looking for a quaint vintage sound with a level of reproduction that can only be achieved by the original Fender.

There are some signs of use (scratches, marks from playing, picking marks, paint chips at the joints, cloudy/bites on metal parts and screws, and other exterior damages).

The fret board has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and electrical chatter removal) upon arrival, and the truss rod has been checked to 60 degrees left and right.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: V040196
Year of manufacture: 1989
Country of manufacture: USA
Case: Hard Case
Accessories: Arm, bridge cover, 5-way selector
Weight: 3.56kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard: No problem, sufficient fretboard height
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.9mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 23.5mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and electrical buzzing removal.

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
V040196

Year of manufacture
1989

Country of manufacture
U.S.A.

Case
Hard Case

Accessories
Arm, bridge cover, 5-way selector

Weight
3.56kg

Truss Rod
No problem, rod checked up to 60 degrees left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.9mm

Neck thickness near 1st fret
21.5mm

Neck thickness near 12th fret
23.5mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and electrical buzz removal