USED Epiphone by Gibson / Inspired by Gibson Flying V Ebony [3.15kg / 2020]

Following the ultra-rare model 1958 style inspired by Gibson. This is an Epiphone by Gibson Inspired Flying V.

Mahogany body, Indian Laurel fingerboard, back-through-body type bridge, CTS pots for Vol/Tone, Epiphone ProBucker-2 & -3 PUs, and neat looks.

It shows signs of use (paint discoloration on the elbow, scuffs and scratches, picking marks, fogging, bits and rust on metal parts and screws, and other exterior damage).

The guitar has been set up upon arrival (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment), the fret board is high enough to play, and the truss rod has been checked to 60° on the tightened side.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 20081529943
Year of manufacture: 2020
Case: Soft case
Weight: 3.15kg
Truss Rod: Tightened up to 60°.
Fretboard: No problem, sufficient fretboard height.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 2.1mm above 12th fret
Nut width: 1.693" / 43mm
Scale: 24.75" / 628.65mm
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
20081529943

Year of manufacture
2020

Case
Soft case

Weight
3.15kg

Truss Rod
Up to 60 degrees on the tightening side

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
2.1mm above the 12th fret

Nut Width
1.693" / 43mm

Scale
24.75" / 628.65mm

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment