USED Fender / Player Stratocaster Maple Fingerboard Black (Made in Mexico)[2022/3.70kg]

Introduced in the summer of 2018 as the successor to the Standard Series, the lineup follows the traditional design and sound of the Fender (Made in Mexico), while incorporating throughout the specs demanded by various categories of modern players. This is a Player Series Stratocaster.

Alder body, modern C-shape maple neck, 9.5R fingerboard with medium jumbo size 22 frets, 3 x Player Series Alnico 5 Strat Single-Coil PUs, Vol/Front & Center Tone/Rear Tone controls, 2-point Tremolo.

Combining the looks of yesteryear with modern playability, this is truly a player's instrument.

It shows some signs of use (scratches and play marks, picking marks on the pickguard film, fogging of metal parts and screws, and other exterior damage).

The fret board has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment) upon arrival, and the truss rod has been checked to 60 degrees left and right.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: MX22232424
Year of manufacture: 2022
Country of manufacture: Mexico
Case: Soft case
Accessories: Arm
Weight: 3.70kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fret Residuals: No problem, as good as new.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.09mm
Neck thickness near 1st fret: 21.19mm
Neck thickness near 12th fret: 23.06mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
MX22232424

Year of manufacture
2022

Country of manufacture
Mexico

Case
Soft case

Accessories
Arm

Weight
3.70kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret remaining
No problem, same condition as new

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.09mm

Neck thickness near 1st fret
21.19mm

Neck thickness near 12th fret
23.06mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment