USED Fender / Cyclone Candy Apple Red (Made in Mexico)[2004/3.55kg]

This is the first Fender (Made in Mexico) Cyclone with medium scale.

Small alder body, maple neck, medium scale, pickguard seems to be original as not a few tortoiseshell models are in circulation, Tex-Mex single coil & atomic humbucker PU, vintage style tremolo, Vol/Tone/3Way-PU selector.

This model has many favorite users due to its easy handling and simple controls, and is recommended for vocalists & guitarists.

The guitar shows considerable signs of use (back panel cut-outs, sunken end pins, sticker marks in places, color fading, paint chips at the joints, scratches and paint cracks/scratches on the outer edge, scuffs, playing marks, picking marks, buckle marks, cloudy/bitz/rust on metal parts and screws, etc.). The guitar has been set up (cleaned and polished) when it arrived.

The fret board has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, burr removal, nut groove correction, gouge removal, sticker removal) upon arrival, and the truss rod has been checked to 60 degrees to the left and right.

* This is a used item, only one of the original is available.
* Please note that there are scratches, dents, and other blemishes that may not show up in the photos. Please understand this in advance.
Product rank: B: There is a sense of use & scratches, quite, but no problem in the use to be used normally

Serial number: MZ4100361
Year of manufacture: 2004
Country of manufacture: Mexico
Case: Soft case
Accessories: Arm
Weight: 3.55kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
Nut width: 42.2mm
Neck Thickness near 1st fret: 21.7mm
Neck thickness near 12th fret: 23.6mm
SCALE: 628mm (24.75")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, burr removal, nut groove correction, burr removal, sticker removal

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary depending on the climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial number
MZ4100361

Year of manufacture
2004

Country of manufacture
Mexico

Case
Soft case

Accessories
Arm

Weight
3.55kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

Nut width
42.2mm

Neck Thickness near 1st Fret
21.7mm

Neck thickness near 12th fret
23.6mm

Scale
628mm (24.75")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, burr removal, nut groove correction, burr removal, sticker removal