USED Ibanez / Prestige SR5006E Oil [4.79kg / made in 2010]

This is a Prestige SR5006E (made by Fujigen), an Ibanez 6-string bass sold from 2009 to 2014, the SR series being highly regarded for its high playability and functionality.

It has a mahogany/wenge top and back body, 5P wenge and bubinga neck (w/ KTS titanium reinforcement), wenge fingerboard, Bartolini Custom 6 soapbar PU, Vol/Bal/3-band EQ (w/Mid Q control)/EQ bypass SW, and Mono-rail IV bridge (16.5mm space).

Japanese-made Fujigen model of the SR series boasts excellent playability, 3-band EQ & mid-frequency for a wide range of sound variations.

There is a GK-PU installed on the top and back of the body/ There are holes filled in the top of the body. It shows signs of use (GK-PU hole on the body back, scuffs and playing marks, picking marks, buckle marks, fading, fogging, bits and rust on metal parts and screws, and other exterior damages).

The fret board has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, screw hole replacement, POTx1 replacement) upon arrival, the fret board is high enough to play, and the truss rod has been checked to about 50° remaining on the tightening side.

* This is a used item, only one of the actual item is available.
* This is a used item, and there are scratches, dents, etc. from use that may not show up in the photos. Please understand this in advance.
Product rank: B+: There are some scratches, but no problem in the normal use

Serial number: F1003234
Year of manufacture: 2010
Country of manufacture: Japan
Case: Hard Case
Weight: 4.79kg
Truss Rod: Approx. 50° remaining on the tightening side
Fret Height: Fret height is available
String Height Low String Side: 2.6mm above 12th fret
String height on treble string side: 2.1mm above 12th fret
Nut width: 54mm
Strings for setup: D'Addario EXL165-6 / .032-.135 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, and screw hole filling
Other: GK-3B mounting screws have holes filled in.

* There are scratches, dents, etc. that are difficult to see in the photos or other damage that is not listed on the item. Please note that there may be scratches and dents that are difficult to see in the photos.

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may change due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
F1003234

Year of manufacture
2010

Country of manufacture
Japan

Case
Hard case

Weight
4.79kg

Truss Rod
Approx. 50° remaining on tightening side

Fret remaining
Fret height available

String Height Low String Side
2.6mm above 12th fret

High string height on treble string side
2.1mm above the 12th fret

Nut Width
54mm

Strings for setup
D'Addario EXL165-6 / .032-.135 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, screw hole filling

Other
GK-3B mounting screw holes have been filled in.