USED YAMAHA / PB-400 NT Pulser Bass [4.21kg]

This is a Yamaha Pulser Bass PB-400.

This Pulser Bass was sold from the late 1970's to 1980's. It has a Sen body, maple neck, maple fingerboard, 1 split type pickup, and Vol/Tone.

The original clover type pegs have been replaced with the YAMAHA OMB-1 pegs used on the BB series and other models, and the PU screws have been replaced with countersunk screws. 2 knobs, 2 pots, jack, and PG screws have been replaced, and finger rest/PU fence/bridge cover are missing.

It shows signs of use (hit scratches, paint chips, minor scratches and scuffs, scuffs and wipe marks, picking marks, buckle marks, cloudy/bitz/rust on metal parts, etc.).

The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and fret adjustment) when it was first received. The originally low fret board is low but still high enough for playing. The truss rod can be tightened and loosened up to ±60 degrees.

* The truss rod is adjustable in the tightening and loosening direction, and its operation has been checked up to ±60° (tightness).
* This is a used item, and there are scratches, dents, etc. due to use that may not show up in the pictures. Please understand it beforehand.
Product rank: B+: There are some scratches, but no problem in normal use.

Serial number: 006337
Country of manufacture: Japan
Case: Soft case
Accessories: Original parts
Weight: 4.21kg
Truss Rod: Note: I have checked the rod to 60 degrees left and right, and it is fine (not much left).
Fretboard: note: still good for cutting, but the frets are low.
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* There are scratches, dents, etc. that are difficult to see in the photos or other than those listed due to the used nature of the instrument. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number 006337

Country of manufacture Japan

CaseSoft case

AccessoriesOriginal parts

Weight4.21kg

Truss RodCautionChecked up to 60 degrees on both sides of the rod, no problem (not much left)

Fret remainderCautionThe frets are low, although they can still withstand cutting.

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment