USED Fender Japan / ST68-TX VWH Vintage White [3.74kg / made from 2006 to 2008]

This is a Fender Japan ST68-TX, a '68 style model with a reproduction of the late '60s paste maple specification, 40mm nut width slim grip, and Schaller F-key pegs, made from 2006 to 2008.

It is equipped with USA-made Texas Special PU, alder body, maple neck, pasted maple fingerboard, and 4-point stopper joint.

The slim nut and the presence of the USA made Texas Special give the guitar a very appealing core tone.

The nut has been replaced and the back panel is missing. The guitar shows signs of use (color burn/discoloration, paint chips and scratches on the outer edge, scratches and scuffs, picking marks, buckle marks, fretboard side paint peeling, metal parts and screws are cloudy, bits, rust, etc.).

The fret board has been set up (nut replacement, fret adjustment, wiring correction, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment) upon arrival, the fret board is high enough to play, and the truss rod has been checked to 60 degrees left and right.

* This is a used item, only one of the actual item is available.
* Please note that there are scratches, dents, and other blemishes that may not show up in the photos. Please understand this in advance.
Product rank: B: There is a sense of use & scratches, quite, but no problem in the use to be used normally

Serial Number: S023346
Year of manufacture: 2006-2008
Country of manufacture: Japan
Case: Soft Case
Accessories: Arm
Weight: 3.74kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
Nut width: 40.9mm
Neck Thickness near 1st fret: 20.1mm
Neck thickness near 12th fret: 22.7mm
SCALE: 628mm (24.75")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Modification: Nut
Repair and Maintenance: Nut replacement, fret adjustment, wiring correction, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* There are some scratches, dents, etc. that are difficult to see in the pictures or are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.