YAMAHA / PACIFICA STANDARD PLUS PACS+12MSB Sparkle Blue M [10]

The Yamaha Professional is a cost-effective series of guitars manufactured at Yamaha's own factory in Indonesia, featuring the same parts and acoustic design as the Professional, and is so complete that it should not be considered a low-cost version.

1. Deeper top and back contours for a more cohesive feel when playing.
The back contour has been deepened to fit more comfortably when holding the guitar, and the top contour (the part where your elbow rests) has been rounded to improve the fit against your arm.

2. Slim C shape for modern play
The Slim C neck shape was adopted to accommodate a wide range of styles, from lead to backing, based on feedback from many players in Japan and the U.S. The "Standard Plus" has a 42mm neck, and the "Standard Plus" has a 42mm neck. The "Standard Plus" features a 42.00mm TUSQ nut. The roll-off processing on the side of the fingerboard is highly precise, and the neck thickness is set at 20.00mm thick at the 1st fret position and 22.4mm thick at the 12th fret position. Both low and power chords are stress-free and highly playable. The newly designed neck heel also provides easy access to the high frets.

3. Hi-Fi pickup "Reflectone" completed in cooperation with Rupert Neve Design
Yamaha developed and manufactured this pickup in collaboration with Rupert Neve Design, a company founded by Rupert Neve, who has produced many famous pro-audio pickups. By using Alnico V magnets and researching and developing the number of turns, winding method, and height of the pole piece from scratch, Yamaha has created an extremely well-balanced pickup that combines the power of low frequencies with "sparkling" high frequencies. 4.

4. acoustic analysis technology by Acoustic Design
Acoustic Design" is a design process that utilizes Yamaha's unique acoustic analysis and 3D modeling. The following processes are used to emphasize the mid-range frequencies by "coupled vibration reinforcement" of the body and neck, and to reproduce tight and clear bass tones by adjusting the low-frequency vibration frequency.
1. "Slit" processing on the body
2. "Lengthening" of the head and neck
3. Control cavity cutting design improvement (NC router cutting)
Serial number:IJO303315
Weight: 3.61kg
Accessories:Tremolo arm, gig case

Country of origin: Made in Indonesia
Body: ALDER 3-5PCS
Neck: MAPLE / SATIN FINISH
Fingerboard: MAPLE
Scale：648mm
Radius：350mm(13.8")
Neck Profile: SLIM C SHAPE
Neck Thickness: 1st Fret 20.0mm / 12th Fret 22.4mm
Fret: MEDIUM / STAINLESS STEEL
Rod: WHEEL TRUSS ROD
Nut: Graph Tech TUSQ 42.0mm
Pickups: [Reflectone] Collaborated P.U. with YAMAHA x Rupert Neve Designs / S-S-H
Controls: Volume & Tone / High Pass Vol & Coil Tap / 5-way SW
Bridge: Gotoh 510T-FE1 (2-point support, 10.8mm pitch between strings)
Tuner: Gotoh SG381 MG-T (locking type)
Others: I.R.A. treatment = None

specs

Country of Origin
Made in Indonesia

Body
ALDER 3-5PCS

Neck
MAPLE / SATIN FINISH

Fingerboard
MAPLE

Scale
648mm

Radius
350mm(13.8")

Neck Profile
SLIM C SHAPE

Neck Thickness
1st Fret 20.0mm / 12th Fret 22.4mm

Fret Size
MEDIUM / STAINLESS STEEL

Rod
WHEEL TRUSS ROD

Nut
Graph Tech TUSQ 42.0mm

Pickups
[Reflectone] Collaborated P.U. with YAMAHA x Rupert Neve Designs / S-S-H

Controls
Volume & Tone / High Pass Vol & Coil Tap / 5-way SW

Bridge
Gotoh 510T-FE1 (2-point support, 10.8mm pitch between strings)

Tuner
Gotoh SG381 MG-T (Locking type)

Others
I.R.A. Treatment=None