USED Burny / MG-145S Yellow Heart [10]

Yellow Heart of Longing

Barney Brand by Fernandez, X Japan's hide model. This popular yellow heart model has the most visual impact among the many models.
The body is basswood with a maple neck bolted on. Fingerboard surface is rosewood, scale is 628mm, and fretboard R is 350R. PU is original CD-100F and VH-401. It has a full mode sustainer, and the controls are 1Vol, 3-way Toggle-SW, Direct Mini-SW, SustainerControls (Sustainer ON/OFF-SW, Sustainer Selecter, and Sustain Volume). The body has scratches and scuffs.

The body has scratches, scuffs, line scratches, dents, and body back refinish. There is a fine cloudy picking scratch on the right side of both PUs. Large and small dents are scattered from the bottom left of the bridge to the edge, and there are scratches around each knob and switch. There is a small scratch on the upper left side of the rear PU. There is a large and small ding on the left neckline of the body side, and the upper right tip has been touched up, possibly to hide a chip. There are some common paint cracks on both sides of the neck joint. The entire body back has been refinished with lacquer, and there is a chemical residue on the lower right side where a sticker was used to remove it. There is also a line of chemical residue on the right side that runs from the side of the strap pin to the lower body end. There are also some paint reaction marks in places. This model is prone to paint cracks, so it was probably refinished to make them less noticeable. There are also some small scratches on the head top. All hardware is gold and shows signs of use, but is in good working order.

The neck is in good condition, and the truss rod can be adjusted in the tightening or loosening direction, and can still be adjusted by turning it slightly in the tightening direction. There are no string marks on the frets and about 60% of the strings are left. Currently, the string height is adjusted at about 2.0mm on the 12F 6th string side and about 1.5mm on the 1st string side.

Overall, there is some refinish on the back of the body, but the top is in good condition with little damage. The sustainer works fine and the instrument is in good condition. The sound is also excellent, and will surely play an active role in the copy band of your dreams!

Weight 4.06kg
Neck condition is currently fine
The truss rod can be adjusted to tighten or loosen.
About 60% frets remaining.
Country of OriginMade in Japan
CaseNon-genuine soft case (* for acoustic guitar)
Accessories
Item rank B+: Some scratches, but no problem in normal use.
Serial numberNone