USED Burny / XB-95H HEATH Model [10]

X Japan Heath model is in stock now!

Body is mahogany, neck is maple with bolt-on specs. Scale is 813mm medium scale 24F. The fretboard surface is rosewood with a 350R fingerboard surface, and the PU is an original PJ-spec FGI. The battery is housed inside the back panel. Controls are Vol, Tone, and 3-way Toggle.

There are scratches, scuffs, line scratches, dents, and binding repair marks on the body. There are picking scratches around the pickups with a fine cloudy look. There is a line scratch on the upper right of the body top, and large and small dents and scratches are scattered around the lower part of the body. The binding on the lower right side of the body top has been chipped or has a different color. The tone knob has been painted clear to reinforce the tone knob. There are scratches all over the body side. There is a large peel of paint on the lower right side of the body back, and there is also a peel of paint on the lower right tip. The upper left tip and lower left tip also have peeling clear paint and scratches. There are scratches around both strap pins from the straps, and scratches, line marks, and large and small dents on the entire body back. The neck and other parts of the body have small scratches, paint peeling, and dents, but nothing that will greatly affect playing. There are some paint chips on the tip of the back of the head, and the top of the head has some white spots due to aging. All hardware is gold, so the plating is worn and worn, and there are some signs of use, but there are no problems with the operation.

The neck condition is fine, and the truss rod can be adjusted in the direction to tighten or loosen, and can still be turned in the direction to tighten and adjust. There are no string marks on the frets and about 60% of the strings are left. Currently, the string height is adjusted at about 2.5mm on the 12F 4th string side and about 2.0mm on the 1st string side.

Overall, there are some binding repairs and signs of use, but the neck is still in good condition! The sound is also good, and it will play an active role in the copy band of your dreams!

Weight 4.06kg
Neck condition is fine as it is now.
The truss rod can be adjusted to tighten or loosen.
About 60% frets remaining.
Country of manufactureMade in Japan
CaseNon-genuine gig case
Accessories
Item rank B+: Some scratches, but no problem in normal use.
Serial numberNone