USED YAMAKI / YLP800CS [10]

Item rank: B+: Some scratches, but no problem in normal use
Serial number: None
Year of manufacture:
Country of manufacture: Japan
Case: Non-genuine soft case
Accessories: None
Weight: 4.28kg
Truss Rod: With a note, there is no problem with the neck at the limit of the rod.
Fret Remaining: With some notes, still can withstand cutting, but the frets are low.
String Height (bass string side): 2.0mm above the 12th fret
String height (treble string side): 1.8mm above the 12th fret
Nut width:
Neck Thickness (near 1st fret):
Neck Thickness (near 12th fret):
SCALE:
RADIUS:
Strings in Setup:
Modified parts:
Repair/Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment
Other: Original finish seems to be 15 coats of lacquer, but the aged finish may be a modification. Some screws and control knobs and truss rod covers are likely replacements. Other upgrade replacements: Grover pegs, CTS pots, capacitors with unknown details, millimeter standard toggle SW, wiring material, Switchcraft jack. Original PU seems to be Mighty Mite USA open type zebra bobbin, but it has been replaced with a covered PU with unknown details, and it has a phase sound when in the mixed position on the toggle SW.

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* The items shown in the pictures are all the items including accessories.
* If there are any problems during the final check before shipping, we will inform you separately.

specs

Item Rank
B+: Some scratches, but no problem in normal use

Serial Number
None

Year of manufacture

Country of manufacture
Japan

Case
Non-genuine soft case

Accessories
None

Weight
4.28kg

Truss Rod
Note: Neck currently in good condition at rod limit

Fret Remaining
There is a note that it can still withstand cutting, but the frets are low.

String Height (Bass String Side)
2.0mm above 12th fret

String height (treble string side)
1.8mm above 12th fret

Nut width

Neck Thickness (near 1st fret)

Neck Thickness (near 12th fret)

SCALE

RADIUS

Strings at Setup

Modification point

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

Other
The original finish seems to be 15 coats of lacquer, but the aged finish may be a modification. Some screws and control knobs and truss rod cover are likely replacements. Other upgrade replacements: Grover pegs, CTS pots, capacitors with unknown details, millimeter standard toggle SW, wiring material, Switchcraft jack. The original PU seems to be a Mighty Mite USA open type zebra bobbin, but it has been replaced with a covered PU with unknown details and a phase sound when in the mixed position on the toggle SW.