USED Headway Headway / Standard Series HN-SAKURA STD Natural [20]

This is the first Standard Series special model with a 12-fret joint using "cherry wood" for the side back.
The pickguard is made of cherry blossom petals, and the same "purple heart" oil finish is used for the fingerboard and bridge, giving it a finish that rivals that of higher-end models.
The use of moderately hard cherry wood for the body has resulted in a bright, full-grained sound that is easy to handle for both strokes and fingerpicking.

* After our arrival, it has been cleaned, strings replaced, rods adjusted, string height adjusted, and nut adjusted, so it is in good playing condition.

It is in good condition with only minor scratches and small dings.

Item rank: B+ (Good)

Truss rod: There is room to spare.
Fret: 60-70%.
Accessories ： Hard case / Genuine spec sheet
Country of Origin ： JAPAN
Weight ： 1.99kg
Serial ： S00493

Truss Rod : No problem, confirmed up to 60 degrees on both sides of the rod.
Fret height: No problem, enough fret height.
String height (bass string side)|2.2mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.3mm
Neck thickness(near 1st fret)|21.2mm
Neck thickness(near 12th fret)|-
Scale|628mm (24.75")
RADIUS|254-356mm (10-14")
Strings for setup|Galli Strings / .012-.054 set
Repair and maintenance parts|Cleaning, string change, rod adjustment, string height adjustment, nut adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.2mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
43.3mm

Neck Thickness (near 1st fret)
21.2mm

Neck Thickness (near 12th fret)
-Neck Thickness (near 12th fret)

Scale
628mm (24.75")

RADIUS
254-356mm (10-14")

Strings for Setup
Galli Strings / .012-.054 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, string height adjustment, nut adjustment