USED FENDER MEXICO / Classic Series 72 Telecaster Custom MN1P Black MOD [10]

Product Rank: B: Fairly scratched & used, but no problem in normal use.
Serial Number: MX4106951
Year of manufacture: 2004
Country of manufacture: Mexico
Case: Non-authentic gig case
Accessories: None
Weight: 3.83kg
Truss Rod：Caution: Checked up to 60 degrees on both sides of the rod, no problem (not much left)
Fretboard: Still good for cutting, but the frets are low.
String height (bass string side): 2.0mm above the 12th fret
String height (treble string side): 1.5mm above the 12th fret
Nut width: 42.0mm
Neck thickness (near 1st fret): 21.7mm
Neck thickness (near 12th fret): 23.6mm
Scale: 648mm (25.5")
RADIUS：184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Modified: 6-way saddle HB style TE bridge plate, Seymour Duncan SH-5 humbuckers (PU cover installed? No solder) / Bridge PU
Repair and maintenance parts: cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment
Other: There are nail marks on the fingerboard surface, peeling paint, scratches and scuffs, and various other damages that are consistent with the age and frequency of playing. (The cavity for the ham PU in the bridge PU has router marks from a professional repair shop, but please note that this is a little bit of rough machining accuracy.)

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* Please note that the items shown in the pictures are all the items including the accessories.
* If there are any problems during the final check before shipment, we will inform you separately.

specs * We will inform you of any problems during the final check before shipment.

Item Rank
B: Fairly scratched and used, but no problem in normal use.

Serial No.
MX4106951

Year of manufacture
2004

Country of manufacture
Mexico

Case
Non-Genuine Gig Case

Accessories
None

Weight
3.83kg

Truss Rod
No problem (not much left), as confirmed up to 60 degrees to the left and right of the rod.

Fret Remaining
There is a note that it can still withstand cutting, but the frets are low.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
42.0mm

Neck Thickness (near 1st fret)
21.7mm

Neck Thickness (near 12th fret)
23.6mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Modified part
Modifications: 6-way saddle HB style TE bridge plate, Seymour Duncan SH-5 humbuckers (PU cover installed with no solder) / bridge PU No solder) / Bridge PU

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

Other
There are various damages such as nail marks on the fingerboard surface, peeling of the paint film, and scratches/scratches that are consistent with the age and frequency of playing. (The cavity for the ham PU in the bridge PU has router marks from a professional repair shop, but please note that the machining accuracy is a little rough).