USED Mosrite / USA V-65 Reissue Black Fillmore (Dana Moseley Era) 2011 [10]

2011 Danamozley-Era Moslite V-65 Reissue Now in Stock

The Fillmore Mozlite USA V-65 Reissue has arrived.
The vibrato mute mount, arm shaft, and roller bridge show no damage; the instrument is in clean, beautiful condition and functions perfectly.
The rod on the arm shaft is not fixed; instead, it is stabilized by the tension of the strings during tuning.
Additionally, the string height adjustment components on the bridge unit feature studs and wheels that move up and down independently and are secured with hex cap nuts; therefore, we recommend having a professional repair technician adjust the string height, taking the bridge’s structure into account.

Overall Condition
This instrument is now entering its 15th year.
While it is not in mint condition, there are no visible signs of heavy performance use, so it retains a beautiful, clean appearance.
The body has various scratches and other damage, primarily on the back.
There is a noticeable dent less than 1 centimeter in diameter on the body end.
On the top of the body, near the open strings, there are some faint dents and pick scratches.
There is a crack in the finish at the corner of the neck pocket on the 1st string side, but the wood itself is not split.
Additionally, there is a linear scuff mark less than 1 centimeter in diameter near the 6th fret on the 1st-string side of the neck grip.
Since the body is black, polishing marks and scuff marks tend to stand out.
Since the finish is clean and retains its luster, these marks may be more noticeable.
There are no signs of significant wear on the frets, so it appears the guitar was not subjected to heavy use or rough handling. Given its clean condition, it likely wasn’t played very often and may have been stored in a hard case.

Information on Each Part
Body neck pocket: 65 BLK / handwritten
Bridge, Pickup, and Cavity: M12-3A / Stamped & handwritten
Back of neck pickup: 65F 1053 / handwritten
Back of bridge pickup: 65R 1053 / handwritten
Control Cavity: Dana Moseley. 2011 (Dana Moseley, 2011)/Handwritten
Each Pot: CTS-M 500KA 1026/Week 26, 2010 (The date on the tone pot is difficult to read due to soldering, but since the last digit is 6, it is considered equivalent)
Output Jack: Switchcraft #11 Mono
Pickup selector: L-shaped toggle switch (no markings visible, but the feel is similar to Switchcraft)
Control knobs: Plain design, not the “M” letter design.
Truss rod adjustment area at the neck end: There are signs of touch-up paint around the drilled hole.

This instrument was produced during the period when Dana Mosley—the daughter of founder Sammy Mosley and a luthier in her own right—was in charge.
You can’t help but feel the charm of pure “Mozleyism.”

Condition: B+: Some minor scratches, but no issues for normal use

Serial Number: 1033
Year of Manufacture: 2011
Country of Manufacture: United States
Case: Hard case (original accessory)
Accessories: Serial number certificate (Mosrite of California, Made in USA, warranty registration), hard case key
Weight: 3.75 kg
Truss Rod: No issues; rod movement tested up to 60 degrees in both directions with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.5 mm at the 12th fret
String Action (Treble Side): 2.0 mm at the 12th fret
Nut width: 39.0 mm
Neck thickness near the 1st fret: 20.3 mm
Neck thickness near the 12th fret: 20.7 mm
Scale: 625 mm (24.6")
RADIUS: 305 mm (12")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
Other: Handwritten note reading “Dana Moseley. 2011” inside the control cavity

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any listed measurements for the truss rod, remaining fret life, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives.

* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.