USED Fender Custom Shop / 1960 Stratocaster Closet Classic Black [11]

2007 Fender Custom Shop closet classic Stratocaster.
Alder body, maple neck, and rose fingerboard. The small head, slab-applied rosewood fingerboard, 3-ply mint pickguard, and other features faithfully reproduce the specifications of the 1960s.
As the name suggests, this model has been reproduced as if it had been stored in a closet for a long time, and the moderate sense of use gives it a good atmosphere.

There are deep dents on the lower part of the body top, which are not likely to be caused by the relic process.
Other scratches are not identifiable as new scratches because it is a reliced model.
Pickups are dated 1-17-07 on the rear only.
Neck date OCT 02 2007. custom store logo and RELIC stamped under the pickguard.
Neck is twisted.

Item rank|B: Fairly scratched & used, but no problems in normal use.

Serial number|R37700
Year of manufacture|2007
Country of manufacture|USA
Case|genuine hard case
Accessories|Arm, bridge cover, shield, strap, spring, certificate
Weight|3.66kg
Truss rod: No problem.
Fretboard is not in good condition and needs to be replaced at the time of next repair.
String height (bass string side)|2.2mm above 12th fret
String height(treble string side)|1.7mm above 12th fret
Nut width|42.2mm
Neck thickness(near 1st fret)|20.7mm
Neck thickness (near 12th fret)|23.5mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Modified parts|-
Repair/Maintenance parts|Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, pot cleaning
Other|-

specs

Item Rank
B: Fairly scratched and used, but no problem for normal use.

12 months old

Serial No.
R37700

Year of manufacture
2007

Country of manufacture
U.S.A.

Case
Genuine hard case

Accessories
Arm, bridge cover, shield, strap, spring, certificate

Weight
3.66kg

Truss Rod
No problem, rod checked up to 60 degrees left and right

Remaining frets
Defective, need to consider replacing at next repair

String height (bass string side)
2.2mm above the 12th fret

String height (treble string side)
1.7mm above the 12th fret

Nut width
42.2mm

Neck Thickness (near 1st fret)
20.7mm

Neck Thickness (near 12th fret)
23.5mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Modification
-Repair/Maintenance

Repair and Maintenance
Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, pot cleaning

Other
-Other