USED MOMOSE / MJM1-STD/NJ Black [11]

Alder body JAZZMASTER type!
Maple neck and Madagascar rosewood fingerboard.
The wide pickup construction and the position of the tailpiece give it a milder sound than the ST and TL.
This is a good looking guitar with the good quality of domestic manufacturing and matching head specification.

There is a paint chip on the body back. There is a small paint chip on the head.
There are some scratches and dents.
The neck is almost straight and in good playing condition.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 7713
Country of manufacture: Japan
Case: Original gig case
Accessories: Arm
Weight: 3.70kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.5mm
Neck thickness near 1st fret: 22.0mm
Neck thickness near 12th fret: 24.5mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

specs

Item Rank
B+: Some scratches, but no problem for normal use.

12 months old

Serial No.
7713

Country of manufacture
Japan

Case
Genuine gig case

Accessories
-case

Weight
3.70kg

Truss Rod
No problem, rod checked up to 60 degrees left and right

Rest of frets
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.5mm

Neck thickness near 1st fret
22.0mm

Neck thickness near 12th fret
24.5mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing