USED SCHECTER / ST TYPE Order Model [11]

ST type order model made by SCHECTER.
ST type with unique grained wood used for the top. Maple neck with bird's eye grain.
Rear pickup is SCHECTER MONSTER TONE ST (USA).
One volume and one tone with coil tap.
Original Schecter pegs. Bridge is Wilkinson.
The Monster Tone ST has a very high output authentic USA Monster Tone that can handle a wide range of sounds from sparkling clean to aggressive distortion.

Only the rear pickup has been replaced with a new one.
Front and center pickups are dirty and rusted.
Many scratches and scuffs on the back of the body. Fingerboard edges have peeling coating.
The neck is in good playing condition with no noticeable abnormalities.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 93775
Case: Original soft case
Accessories: Arm
Weight: 3.57kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fret Depth: Still good for cutting, but the frets are low.
String Height Low String Side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.6mm
Neck thickness near 1st fret: 20.0mm
Neck thickness near 12th fret: 21.9mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

Specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
93775

Case
Genuine soft case

Accessories
Arm

Weight
3.57kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
Note that the frets are low and can still withstand cutting.

String Height Low String Side
2.0mm above 12th fret

String height on high string side
1.5mm above the 12th fret

Nut width
41.6mm

Neck thickness near 1st fret
20.0mm

Neck thickness near 12th fret
21.9mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair