USED Momose / MST1-STD Black [11]

This model recreates the ST sound of the early 60s by combining an alder body and rosewood fingerboard.
The fingerboard is made of slab-applied Madagascar rosewood, which is now rare, and the body is made of 2-ply US alder.
The combination of the dense and tight sounding Madagascar rosewood and the withered midrange of the well-seasoned Alder is reminiscent of a vintage guitar sound in good condition.
The pickups are equipped with momose's original TWANG60 ST.
In accordance with the specifications of this era when the 3rd string was changed from wound strings to plain strings, the height of the 3rd string pole piece is raised and rosewood fretboard is used for a balance that is typical of the ST model.

There are scratches, dents, and other signs of use.
The neck is in good playing condition.
The volume knob has been replaced.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: 10424
Country of manufacture: Japan
Case: Original gig case
Accessories: Arm
Weight: 3.67kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.2mm
Neck thickness near 1st fret: 21.3mm
Neck thickness near 12th fret: 24.3mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, volume knob replacement

Specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
10424

Country of manufacture
Japan

Case
Genuine gig case

Accessories
Arm

Weight
3.67kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.2mm

Neck thickness near 1st fret
21.3mm

Neck thickness near 12th fret
24.3mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, volume knob replacement