USED Aria Pro II / PE-1500RI Stained Brown [11]

A reissue model of the first PE "PE-1500" released in 1976 is now available.
The chambered maple top/back body is set neck-jointed with a maple neck with a Madagascar rosewood fingerboard.
As was the case back then, smooth heel-less processing at the neck joint dramatically improves playability in the high position.
The pickups are equipped with DiMaggio "Super Distortion" pickups as standard, and the bridge is equipped with the original "Supermatic" bridge.
There is a paint chip with a ding on the tip of the head, and there are many minor scratches and dings scattered around the head, neck grip, body top and back, etc. overall.
The neck is in good playing condition with no noticeable abnormalities.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: 20509073
Country of manufacture: Japan
Case: Hard Case
Weight: 4.27kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard is high enough.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.1mm
Neck thickness near 1st fret: 21.1mm
Neck thickness near 12th fret: 23.7mm
SCALE: 648mm (25.5")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
20509073

Country of manufacture
Japan

Case
Hard case

Weight
4.27kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Leftover frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.1mm

Neck thickness near 1st fret
21.1mm

Neck thickness near 12th fret
23.7mm

Scale
648mm (25.5")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing