USED Fender Japan / ST68-85TX 3-Tone Sunburst [11]

"Fender Japan" Stratocaster with large head/4-point fastening joint is in stock!
1995-1996 Top of the line model with Texas Special pickups.
Alder body, maple neck and maple fingerboard.

The overall appearance is commensurate with its age, with scratches, dings, and chipped paint.
There is a missing back panel, dents from the back of the body to the sides, numerous paint chips, and rust and tarnish on metal parts.
There are dents on the side of the second fret, dents on the back of the neck, dents on the back and side of the head, and scratches and dings on the tip.
The neck is twisted, and the sound is stuck at the high frets when played live, but there is no problem with the sound coming out through an amp under normal use.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: CIJ N083818
Year of manufacture: 1995-1996
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 3.63kg
Truss Rod: With some caveats, rod is checked up to 60 degrees to the right and left, and there is no problem (torsion and high spring are present).
Fretboard: Still can be cut, but the frets are low.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 40.3mm
Neck thickness near 1st fret: 20.1mm
Neck thickness near 12th fret: 23.8mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

Specs

Item Rank
B: Fairly scratched and used, but no problem for normal use.

12 months old

Serial No.
CIJ N083818

Year of manufacture
1995-1996

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
3.63kg

Truss Rod
No problem (twisting and high spring)

Remaining frets
There is a note that it can still withstand cutting, but the frets are low.

String Height Low String Side
2.0mm above 12th fret

High string side
1.5mm above the 12th fret

Nut width
40.3mm

Neck thickness near 1st fret
20.1mm

Neck thickness near 12th fret
23.8mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair