USED Fender Japan / TL52-650SPL Blonde [11]

Fender Japan 1990-1991 "TL52-650SPL" is in stock!
Made in Japan by Fujigen. (Serial number "K027159")
This special edition model was inspired by Keith Richards' "Micawber" style.
White ash body, maple neck and maple fingerboard.
The HS configuration with covered gold humbuckers on the front and a single coil on the rear pickups covers a wide range of sounds from thick and sticky cleans to sharp cutting.

Brass 6-point saddle bridge, 1-ply black pickguard, etc.
The special "SPL" custom feel makes this one a charmer!
Overall, there are scratches, dents, paint deterioration, dirt, and other signs of use commensurate with the age of the instrument.
Metal parts are scratched, rusted, and dulled, and the toggle switch is discolored due to sunburn.
There are cracks on the tip of the head and stains on the back of the body that cannot be removed.
All side position marks are sunken.
There is no noticeable abnormality on the neck, and there are no problems with the playing condition.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: MIJ K027159
Year of manufacture: 1990-1991
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 4.54kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.6mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 22.4mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment.

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
MIJ K027159

Year of manufacture
1990-1991

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
4.54kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.6mm

Neck thickness near 1st fret
20.5mm

Neck thickness near 12th fret
22.4mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment