USED Greco / BM900 Red [11]

The Brian May "Red Special" type of Greco's "Project Series" appeared in the late 1970s.
This is a faithful reproduction of the legendary machine with Japanese craftsmanship.
The mahogany body has a distinctive shape, and the maple neck is slim and easy to grip. The fingerboard is rosewood, providing an excellent balance of playability and sound removal.

In addition to three single-coil pickups, an on/off switch and phase switch for each pickup are provided. It is also equipped with a tremolo unit, which allows for a wide range of expression from delicate vibrato to aggressive sounds.

In the promotional video "Good Old Fashioned Lover Boy," Brian May himself actually plays this model.
This model is more than just a copy of the original; it is a highly sought-after model that still enjoys a high level of popularity among fans.
There are scratches and dents on the overall appearance, and the peg knob on the 3rd string has been replaced.
The neck is low and the frets are a little high, so there is some chatter at the high frets.
However, the neck has been set up to an acceptable level for amp output by adjusting the fret board and other adjustments.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: H787897
Year of manufacture: 1978
Case: Hard Case
Weight: 3.80 kg
Truss Rod: Note: Checked up to 60 degrees to the left and right, no problem.
Fret Remaining: Note: Still can be cut, but the frets are low.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.2mm
Neck thickness near 1st fret: 20.0mm
Neck thickness near 12th fret: 22.3mm
SCALE: 628mm (24.75")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number H787897

Year of manufacture 1978

CaseHard case

Weight 3.80kg

Truss RodCaution: No problem when the rod is checked up to 60 degrees to the left and right (there is a little high spring).

Fret RemainingCaution: Still can withstand cutting, but the frets are low.

String height: 2.0mm above the 12th fret on the bass string side

String height: 1.5mm above the 12th fret on the treble string side

Nut width 43.2mm

Neck thickness near the 1st fret 20.0mm

Neck thickness 22.3mm near 12th fret

Scale 628mm (24.75")

RADIUS184mm (7.25")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair