USED SAGO / Classic Style - S Mod Burgundy Mist [11]

The Classic Style - S is a Stratocaster that respects the Stratocaster of yesteryear while incorporating SAGO's proven technology and aesthetic sensibilities.
This particular model is a "one-of-a-kind" model with further parts changes and modifications made to the custom-ordered specifications.
The body is made of Alder, which is a standard of the classic style. The color is a beautiful burgundy mist. The neck is made of maple, but does not appear to have the SAGO standard thermo treatment. The fretboard is beautiful rosewood, which provides a sucking feel to the fingers and a warm and soft tonal character.
The pegs are equipped with the highly reliable Gotoh Magnum lock type, which provides both tuning stability and easy maintenance.
All pickups have been replaced with Suhr pickups, with a Doug Aldrich Neck on the front, ML Middle in the center, and 53mm Doug Aldrich Bridge on the rear. This combination of delicacy and power gives the guitar a wide range of sounds that can be used for modern music while maintaining its vintage nuances.
The controls are simple and practical, with one volume, one tone, and a 5-way selector, allowing for intuitive sound creation. The bridge is a 6-point tremolo combined with a block type saddle, which provides sustain and playing feel.
Missing arm.
Scattered paint chips and purple paint that appears to be the underlying surface. There is a blackened area around the head logo.
There is a ding near the back end of the neck. There are scratches and dents, and the instrument shows some signs of use.
There are no noticeable abnormalities on the neck, and there are no problems with the playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 35000318
Country of manufacture: Japan
Case: Non-authentic soft case
Accessories: * Arm missing
Weight: 3.79kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.3mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 23.5mm
SCALE: 648mm (25.5")
RADIUS: 356mm (14")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or other blemishes not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
35000318

Country of manufacture
Japan

Case
Non-genuine soft case

Accessories
* Arm missing

Weight
3.79kg

Truss Rod
No problem, rod checked up to 60 degrees left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.3mm

Neck thickness near 1st fret
21.5mm

Neck thickness near 12th fret
23.5mm

Scale
648mm (25.5")

RADIUS
356mm (14")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment