USED Gibson Custom / SG Special Reissue Cherry [11]

A gem that recreates the charm of the vintage SG in the modern age!
The Gibson Custom SG Special Reissue is a Custom Shop model that faithfully reproduces the 1963 SG Special. The lightweight mahogany body and slim '63 C-shape neck make it comfortable to play for extended periods of time. The sharp and aggressive tone produced by the original P-90 soap bar can be used from clean to overdrive. This is a must-have for SG fans, combining historical style and solid playability.
There are scratches, dents, and dull parts.
The bridge has been replaced with a TonePros AVT-II, but the original parts are included.
The neck is in perfect playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: 000891
Country of manufacture: USA
Case: Hard Case
Weight: 2.97kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard is high enough.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.6mm
Neck thickness near 1st fret: 19.9mm
Neck thickness near 12th fret: 22.3mm
SCALE: 624mm (24.56")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
000891

Country of manufacture
United States of America

Case
Hard Case

Weight
2.97kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.6mm

Neck thickness near 1st fret
19.9mm

Neck thickness near 12th fret
22.3mm

Scale
624mm (24.56")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair