USED Fender Japan / JB75-750M Natural [11]

JB75-750M, an authentic Jazz Bass from Fujigen's production period
Fender Japan JB75-750M is a 70's style jazz bass from Fujigen's production period. The ash body has a clear and solid bass tone, and the maple neck and fingerboard provide a clear and powerful mid-range and treble. The 20-fret neck shape is comfortable in the hand and provides a comfortable playing experience for bassists seeking a vintage feel. The highly accurate finish that can only be achieved during Fujigen's production period is also a major attraction, and can be enjoyed both in terms of appearance and playability.
There is a noticeable paint peeling near the jack.
There are also scratches, dents, dull parts, rust, and other signs of use.
The bridge has been replaced with one made by Moon.
There is a small amount of rod tightening remaining, but there are no problems with the current playing condition.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: MIJ K005796
Year of manufacture: 1990-1991
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 4.65kg
Truss Rod: No problem, but I have checked the rod to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 38.2mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 24.5mm
SCALE: 864mm (34")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL165 / .045-.105 set
Modified parts: All controls replaced, all screws replaced, all knobs replaced, all pickguard/controls screws replaced
Repairs and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical replacement, parts replacement

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: There are some scratches, but no problem in normal use.

Serial number MIJ K005796

Year of manufacture 1990-1991

Country of manufacture Japan

CaseNon-genuine soft case

Weight4.65kg

Truss RodCautionChecked up to 60 degrees on both sides of the rod, no problem (not much left)

Fret remainderNo problem, sufficient fret height.

String height: 2.5mm above the 12th fret on the bass string side

String height: 2.0mm above the 12th fret on the treble string side

Nut width 38.2mm

Neck thickness near 1st fret 21.5mm

Neck thickness near 12th fret 24.5mm

Scale 864mm (34")

RADIUS184mm (7.25")

Strings for setupD'Addario EXL165 / .045-.105 set

Modified partReplacement of all control parts, replacement of all screws, replacement of all knobs, replacement of all pickguard/control part screws

Repair/Maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical replacement, parts replacement