USED Heritage / Custom Shop Core Collection H-150 Dirty Lemon Burst [11]

The Heritage H-150, a modern take on the vintage spirit
The Heritage Custom Shop Core Collection H-150 is a faithful reproduction of a 1950s Les Paul Standard, with a lightweight mahogany body and flame maple top for a rich, responsive sound. neck and Heritage's original 225 Classic humbuckers provide both vintage tone and modern playability at a high level. The high quality nitrocellulose lacquer finish gives the guitar an attractive appearance as it is played.
There are some minor scratches, but it is in relatively clean condition.
The pegs have been replaced with GOTOH.
The frets have been worn out due to dents in the fretboard.
The neck is in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: HC1220418
Year of manufacture: 2022
Country of manufacture: USA
Case: Original hard case
Weight: 3.69kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.5mm
Neck thickness near 1st fret: 22.4mm
Neck thickness near 12th fret: 25.1mm
SCALE: 624mm (24.56")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number HC1220418

Year of manufacture 2022

Country of manufacture USA

CaseGenuine hard case

Weight3.69kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

Fret remainder no problem, there is enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.5mm

Neck thickness near 1st fret 22.4mm

Neck thickness near 12th fret: 25.1mm

SCALE 624mm (24.56")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair