USED Orville / LPS-80F Cherry Sunburst [11]

Orville LPS-80F, a masterpiece of Japanese Les Paul!

This is an Orville Les Paul standard model produced by Fujigen in the mid-1990s. The royal body construction with mahogany back and photo-framed maple top, and rich sustain from the set neck, delivers a sound comparable to that of Gibson USA-made guitars. The combination of an original humbucker and condenser provides a fat, clear tone.

The carefully crafted Fujigen finish makes for excellent playability. Due to its limited production run, this is one of the hardest to find today. This is a recommended unit for both stage and recording.
There are scratches, dents, and dull parts.
The frets have been worn out due to dents.
The neck is in good playing condition.
The pickguard has been removed and is missing.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: 712463
Country of manufacture: Made in Japan
Case: Non-authentic hard case
Weight: 3.97kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.5mm
Neck thickness near 1st fret: 21.3mm
Neck thickness near 12th fret: 24.7mm
SCALE: 628mm (24.75")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number 712463

Country of manufactureMade in Japan

CaseNon-genuine hard case

Weight 3.97kg

No truss rod problem, confirmed up to 60 degrees to the left and right.

Fret remainder no problem, fret height is high enough

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 43.5mm

Neck thickness near the 1st fret: 21.3mm

Neck thickness near 12th fret 24.7mm

Scale 628mm (24.75")

RADIUS254mm (10")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment