USED ESP / HORIZON-III Mod Black [11]

The Horizon-III is ESP's high-end model.
The 25.5" scale produces both a fast tone and a clear mid-high range, and the combination of a maple neck and mahogany back produces a sustain and a thick sound that is present regardless of whether you are playing lead or rhythm. The combination of a maple neck and mahogany back produces a sound with sustain and thickness, which is very impressive whether you are playing lead or rhythm.
The front pickup is a Seymour Duncan SH-1n and the rear pickup is a TB-11. The front pickups have been swapped out, and although the tap function cannot be used since they are not 4-core pickups, they provide a thick-core clean and warm drive sound. The rear TB-11 has a sweet, high-gain sound with a lustrous presence for lead playing. Push-button coil tapping at the volume provides a well-balanced sound character that can be used for a wide range of genres.
The bridge is a Floyd Rose Original, ensuring stable tuning performance when arming. The instrument is composed of high-quality parts down to the smallest detail, and ESP's professional-use design philosophy can be felt everywhere. The black gloss finish is beautiful and will be a favorite for many years.
There are some scratches and dents, but nothing that stands out.
The neck is in good playing condition with no noticeable abnormalities.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: K1243504
Case: Original hard case
Accessories: Arm
Weight: 3.41kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right, no problem
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.2mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 22.7mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* This is a used item and there are scratches, dents, etc. that are difficult to see in the photos or other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number K1243504

Case Genuine hard case

AccessoriesArm

Weight3.41kg

No truss rod problemNo problem when the rod has been checked up to 60 degrees to the left and right.

Fret remainder no problem, enough fret height is available

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.2mm

Neck thickness near 1st fret 20.5mm

Neck thickness 22.7mm near 12th fret

Scale 648mm (25.5")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment