USED Fender Japan / ST57-70TX Mod Black [11]

This is a 1957 style Stratocaster model by Fender Japan.
This high-grade model features the classic specs of an alder body, one-piece maple neck, and 7.25" radius fingerboard, and is equipped with USA-made Texas Special pickups.
The sound is a powerful single tone with the edge and tenacity of a Texas Special. It is characterized by a thick and lustrous midrange, and is suitable for a wide range of genres such as blues and rock. The elaborate integration and stable neck condition, which can only be achieved by Japanese manufacturing, are also appealing.
The front and rear pickups are original Texas Special with black bobbin and black and white cross wire lead wires. The center pickup is a black bobbin with black/yellow crosswire, and is believed to be a replacement, but the output balance is good.
The string guide has been replaced with a round type.
There is a chip on the wood near the nut.
There is a paint crack at the neck joint.
Overall, there are scratches, paint cracks associated with dents, and rust on the metal, showing signs of use.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: O002044
Year of manufacture: 1997-2000
Country of manufacture: Japan
Case: Non-authentic soft case
Included: Arm
Weight: 3.37kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.1mm
Neck thickness near 1st fret: 22.2mm
Neck thickness near 12th fret: 25.2mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair (jack replacement)

* Please note that this is a used instrument and there are scratches, dents, and other damage that are not easily seen in the photos or described in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B: Fairly scratched and used, but no problem in normal use.

Serial number O002044

Year of manufacture 1997-2000

Country of manufacture Japan

CaseNon-genuine soft case

AccessoriesArm

Weight3.37kg

No truss rod problemNo truss rod problem.

Fret remainder no problem, enough fret height is available

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.1mm

Neck thickness near 1st fret 22.2mm

Neck thickness 25.2mm near 12th fret

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair (jack replacement)