USED Sadowsky TYO / modern Edge ST Lake Placid Blue [11]

A Japan-exclusive model that offers the transparency of a single coil and the power of a humbucker in a single instrument at your disposal
The Sadowsky TYO Modern Edge ST is an electric guitar from Sadowsky's TYO Series custom line, available only in Japan. It is a modern and unique guitar that combines the careful finishing by skilled Japanese craftsmen with the design philosophy of the New York studio.

This model is equipped with a single coil on the front and a humbucker on the rear. The rear hum is tapped to a single coil by default for a transparent clean sound. When the mini switch is turned on, the rear humbucker is directly connected for a powerful full hum sound, and when off, the pickup select can be used as usual for a wide range of sound makeup.
Alder body, maple neck, and Morado fingerboard are used. Sperzel locking pegs ensure stable tuning.
This is a gem that combines a vintage feel with a modern, contemporary design.
There are paint chips near the jack and on the top end of the body.
There are scratches, dents, and other signs of use such as dull parts.
The back panel is missing.
The frets have been worn out due to dents.
The neck is in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 6166
Case: Original semi-hard case
Accessories: Certificate of Authenticity, Arm
Weight: 3.44kg
Truss Rod: No problem, rod has been checked up to 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.3mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 22.0mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number 6166

Case Genuine semi-hard case

AccessoriesCertificate, arm

Weight3.44kg

No truss rod problemNo problem after checking the rod to 60 degrees to the left and right

Fret RemainingNo problem, sufficient fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.3mm

Neck thickness near 1st fret 21.0mm

Neck thickness 22.0mm near 12th fret

Scale 648mm (25.5")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment