USED E-II / EC EVERTUNE Black Satin [12]

E-II brand EC with EVERTUNE bridge is now in stock.
The E-II is a new standard series of world-standard guitars directed by ESP USA and manufactured in Japan.
The thin body with back contour makes it easy to handle and has enough specs for live gear.
Traditional wood specs of hard maple top/mahogany back, mahogany neck/ebony fingerboard, and Seymour Duncan SENTIENT and PEGASUS combination are installed, and coil tap is possible by pushing/pulling the tone. The pegs are equipped with GOTOH locking pegs for quick string changes and stable tuning.
It is equipped with an ENERTUNE bridge that prevents tuning deviations under any conditions of use, and features an amazing function that hardly changes the pitch even when chalking.

The paint on the tip of the head is chipped, and there are many dents scattered on the top and back of the body, and the paint is shiny in parts due to rubbing throughout.
The paint is chipped on the tip of the head, and there are many dents scattered on the top and back of the body.
The strap pin has been replaced with a Jim Dunlop locking pin, and the strap side parts are missing.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: ES2284193
Year of manufacture: 2022
Country of manufacture: Japan
Case: Original gig case
Weight: 3.46kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.8mm
Neck thickness near 1st fret: 20.6mm
Neck thickness near 12th fret: 21.3mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

Specs

Item Rank
B: Fairly scratched and used, but no problem for normal use.

12 months old

Serial No.
ES2284193

Year of manufacture
2022

Country of manufacture
Japan

Case
Genuine gig case

Weight
3.46kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.8mm

Neck thickness near 1st fret
20.6mm

Neck Thickness near 12th Fret
21.3mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment