USED SCHECTER / SD-II-24-AS MOD Aqua Blue [12]

Schecter's signature model that can accommodate any playing style and sound.
This model features a beautiful laminated quilted maple top, ash body, and one-piece maple neck.
The pickups have been replaced: Duncan SH-1n in the front, SH-11 in the rear, and the original center pickup.
Parts and wiring in the circuit have also been changed, with CTS pots for volume/tone and orange drop capacitors.
The pickup selector has been changed to a 3-way, and the mini switch has been changed to a direct switch.
Therefore, coil tap and split tone control are not effective.
The bridge is equipped with Schecter's original locking tremolo for stable tuning even under heavy arming.

The aqua blue color is slightly faded and has a greenish tint.
There are some minor scratches and dings scattered throughout, and the metal parts are slightly dull.
There is a crack on the bobbin of the rear pickup, but it does not affect the sound quality or use.
The guitar is in good playability condition and has been maintained and cleaned at our repair center.
The strap lock is missing.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: SA0912013
Year of manufacture: 2009
Country of manufacture: Japan
Case: Original gig case
Accessories: Arm
Weight: 3.62kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.2mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 22.0mm
SCALE: 648mm (25.5")
RADIUS: 356mm (14")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

Specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
SA0912013

Year of manufacture
2009

Country of manufacture
Japan

Case
Genuine gig case

Accessories
Arm

Weight
3.62kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.2mm

Neck thickness near 1st fret
20.5mm

Neck thickness near 12th fret
22.0mm

Scale
648mm (25.5")

RADIUS
356mm (14")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment