USED MOON / ST-195 EMG Walnut / SSH MOD Natural [12]

ST type with walnut body and neck is now in stock.
This is a handcrafted guitar by MOON, a highly acclaimed Japanese component guitar maker, utilizing natural "wood sound".
The clear and flat sound of the EMG pickups provides the perfect balance between the walnut, which is characterized by its firmness and rich sustain, and the EMG pickups.

The rear pickup has been replaced with an early EMG "58" pickup, and the body cavity has been extended by hand.

The pickguard is gold anodized according to the catalog specs, so it is possible that the pickups were replaced with humbuckers and the pickguard was modified after the one-ply black pickguard was replaced.
There are some minor scratches and dings scattered throughout, and the metal parts are dull and the plating is peeling.
Although there are some signs of use and modifications, each part has been maintained and cleaned at our repair center, and the playability is good.
The back panel and arm are missing.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 15043
Country of manufacture: Japan
Case: Non-authentic hard case
Weight: 3.95kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.4mm
Neck thickness near 1st fret: 19.7mm
Neck thickness near 12th fret: 21.7mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, deburring, electrical repair

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may vary due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
15043

Country of manufacture
Japan

Case
Non-genuine hard case

Weight
3.95kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.4mm

Neck thickness near 1st fret
19.7mm

Neck thickness near 12th fret
21.7mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, burr removal, electrical repair