USED BURNS LONDON / Hank Marvin Signature 1964 Reissue Fiesta Red [12]

The Shadows' Hank Marvin model is now in stock.
This is a reproduction of a model manufactured in 1964 as a model for Hank Marvin, lead guitarist for The Shdows, a British instrumental rock band active in the 1950s and 1960s.

American alder body with a bolt-on joint and Canadian hard rock maple neck.
The pickups are three original Rez-o-Matic Single Coils with one volume/two tone controls, but the rear tone can be pulled up to turn on the front + rear pickups in any position.

It is equipped with the original design Rez-o-Tube Tremolo-System, which further emphasizes its unique look.
It is in good condition with only minor scuffs and scratches.
It has been maintained and cleaned at our repair center and is in good playability.
The strap pin has been replaced with a Schaller locking pin, and the strap side parts are included.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 0354
Case: Original hard case
Accessories: Lock pin, wrench, cloth
Weight: 4.03kg
Truss Rod: No problem, rod checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass string: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.8mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 25.0mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, cleaning of electrical controls

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
0354

Case
Genuine hard case

Accessories
Lock pin, wrench, cloth

Weight
4.03kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.8mm

Neck thickness near 1st fret
21.5mm

Neck thickness near 12th fret
25.0mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, cleaning of electrical controls