USED MUSIC MAN / Axis EX 1997 Trans Gold [12]

AXIS, made in Japan, is now available in the most popular Trans-Gold!
This model uses the same parts as the USA model and was produced in a domestic workshop designated by Ernie Ball/Musicman.
This model was made in 1997 according to the neck and body date.

The small body and asymmetrical grip neck boasts stress-free playability even for long hours, and the simple volume-only control is also attractive.

The alder body is laminated with beautiful quilted maple on the top, and bird's eye maple is used for the neck and fingerboard, making this guitar not only comfortable to play but also great to look at.

The original gig case is missing, but a genuine MUSIC MAN USA hard case is included.
There are some scratches and dents overall, but the guitar is in good condition with little signs of use.
It has been maintained and cleaned at our repair center and is in good playability.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: A80001
Year of manufacture: 1997
Country of manufacture: Japan
Case: USA genuine hard case
Accessories: Arm, Wrench
Weight: 3.62kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.6mm
Neck thickness near 1st fret: 21.1mm
Neck thickness near 12th fret: 23.5mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
A80001

Year of manufacture
1997

Country of manufacture
Japan

Case
Genuine USA hard case

Accessories
Arm, Wrench

Weight
3.62kg

Truss Rod
No problem, confirmed to 60 degrees left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.6mm

Neck thickness near 1st fret
21.1mm

Neck thickness near 12th fret
23.5mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair