USED YAMAHA / RGXA2 Black [12]

The RGX A2 is an "air guitar" developed based on the concept of weight reduction.
The RGX A2 is an amazingly lightweight guitar without sacrificing sound.

The body is made with Alternative Internal Resonance technology to achieve an ultra-lightweight body. The RGX A2 features a plate to support the head's strength, a counterbore around the string post to increase string tension, and cylinder-shaped pegs made from machined aluminum. The controller has one volume and one pickup selector.

The controller has one volume and three pickup selector positions, with green and blue LEDs indicating the pickup selection status, for excellent functionality and visual appeal.
There is a ding on the tip of the head and several prominent line scratches on the elbow contour of the body top.
There are also numerous scratches and dings scattered throughout the instrument, giving it a feeling of use.
The strap pins have been replaced with Schaller locking pins, but the strap side parts are missing.
The strap pin has been replaced with a Schaller locking pin, but the strap side part is missing.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: HKM163034
Year of manufacture: 2014
Country of manufacture: Indonesia
Case: Soft case
Weight: 2.64kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String Height: Bass string side: 2.0mm above the 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 19.8mm
Neck thickness near 12th fret: 23.1mm
SCALE: 648mm (25.5")
RADIUS: 406mm (16")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, fret lift correction and alignment

* The truss rod, fretboard rest, and string height are measured by our staff at the time of setup, and may change due to the effects of climate, humidity, and other environmental factors.
We do not guarantee that these values will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial number
HKM163034

Year of manufacture
2014

Country of manufacture
Indonesia

Case
Soft case

Weight
2.64kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
19.8mm

Neck thickness near 12th fret
23.1mm

Scale
648mm (25.5")

RADIUS
406mm (16")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, fret lifting correction, and alignment