USED Fender Japan / Jazz Bass JB75-750 3Tone Sunburst [12]

Fender Japan JB75 model by Fujigen is now in stock.
This is a '75 style jazz bass with a bullet nut, block position, and neck binding.
It is MADE IN JAPAN K serial and was manufactured by Fujigen from 1990-1991.

The ash body produces a punchy sound and brings back the sound that supported the bottom of the music scene in the late 70s.
The elbow contour area is dotted with dings and scratches, and there are numerous scratches and dings scattered throughout.
The strap pin has been replaced with a Schaller locking pin, but the strap side part is missing.
The strap pin has been replaced with a Schaller locking pin, but the strap side part is missing.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: MIJ K002582
Year of manufacture: 1990-1991
Country of manufacture: Japan
Case: Original hard case
Weight: 4.36kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fret Depth: Still good for cutting, but the frets are low.
String Height Low String Side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 38.3mm
Neck thickness near 1st fret: 20.1mm
Neck thickness near 12th fret: 24.0mm
SCALE: 864mm (34")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
MIJ K002582

Year of manufacture
1990-1991

Country of manufacture
Japan

Case
Genuine hard case

Weight
4.36kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
Note that the frets are low and can still withstand cutting.

String Height Low String Side
2.5mm above 12th fret

High string on treble string side
2.0mm above the 12th fret

Nut width
38.3mm

Neck thickness near 1st fret
20.1mm

Neck thickness near 12th fret
24.0mm

Scale
864mm (34")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair